Instructions for configuring the Outlook Desktop Client for use at school.
(Please complete the steps listed below when you are in the school building.)

It is possible that the mail server will automatically reconfigure your Outlook settings.  If so, when you open Outlook you should see Connected to Microsoft Exchange in the lower right corner of your screen.  If you are not connected, follow the steps below.

1. If Outlook is open you will need to close it
2. Click the START button
3. Click Control Panel
4. Double click the Mail icon, which will open the window below
   

 
5. Click the E-mail Accounts… button, which will open the window below

 
6. Click on your mail account Name so that is highlighted, as above
    
7. Click Change on the toolbar, which will open the window below (Make sure you do not accidentally click Remove)

 
8. In the box to the right of Microsoft Exchange Server, replace EX6.wc.trevornet.org with TDEX01.wc.trevornet.org
9. Make sure the box to the left of Use Cached Exchange Mode is checked
10. Click the Check Name box to reaffirm your user name.  (If that does not work, delete and re-enter your name in the format: last name, first name)
11. Click Next until you see a Finished or Okay button and click on it.
12. Open Outlook and make sure you are connected to Exchange\

Instructions for configuring the Outlook Desktop Client for use on your laptop when you are outside of school.
(Please complete the additional steps listed below after you have configured Outlook to work inside the school building.)

1. In Outlook, select Tools then Account Settings... which will open the box below
2. Click on your mailbox account name, which will highlight it
Click the Change... button
 
3. The next box you’ll see is Change E-Mail Account
4. Click the More Settings... button in the lower right corner of the box
   
    
5. Click the Connection tab
6. Click the box to the left of Connect to Microsoft Exchange using HTTP
7. Click the Exchange Proxy Settings button
   
    
8. When the Microsoft Exchange Proxy Settings box opens, enter tdex01.wc.trevornet.org in the first white space (example below)
9. Check the box to the left of Only connect to proxy servers that have this principal name in their certificate:
10. Enter msstd:tdex01.wc.trevornet.org in the second white box
11. Check the box to the left of On fast networks, connect using HTTP first, then connect using TCP/IP
12. Make sure the box to the left of On slow networks, connect using HTTP first, then connect using TCP/IP is also checked
13. Under Proxy authentication settings, select Basic Authentication
14. Click the OK buttons until you see the Finish button
15. Click the Finish button
    
     
16. Close Outlook
17. Wait about 1 minute and restart Outlook.
18. Note: In some versions of Outlook the Microsoft Exchange Proxy Settings dialog box (below) may read “Mutually authenticate the session when connecting with SSL” instead of "Only connect to proxy servers that have this principal name in their certificate box"